|
Are you looking for:
|
Prolite Surfboard Traction Pad
Josh Kerr II Pro Pad (Multiple Colors)
Prolite Josh Kerr II Traction Pad
Prolite traction is the lightest traction on the market today. The Prolite Josh Kerr II is hand cut and made with a Split-Pyramid Groove, featuring the lightest and most responsive traction available, the Split-Pyramid allows water to flow off the traction pad quicker which equates to better grip on the pad. Prolite uses a super light EVA foam that provides both maximum comfort and grip, along with new and improved German glue that will never let you down.
The Prolite Josh Kerr Traction Pad is a 3 piece pad with a low arch and a medium kick.
Prolite Josh Kerr II Traction Pad Dimensions:
Pad Length - 300mm
Pad Width - 300mm
Kick Height - 28mm
Arch Length - 175mm
Arch Height - 4mm
Arch Width - 48mm
Prolite Josh Kerr II Traction Pad Colors:
Green/Black
Light Blue/Gray
Purple/Black
Red/Blue
Orange/Blue
Become a Finatic™ and test fins from FCS & Future Fins!
And NOW Kinetik Racing Fins!
|
Prolite Surfboard Traction Pad
Timmy Reyes I Pro Pad (Multiple Colors)
Prolite Timmy Reyes I Traction Pad
Prolite traction is the lightest traction on the market today. The Prolite Timmy Reyes I is hand cut and made with a Micro-Dot Grove, the lightest and most responsive traction available, with a thinner profile for better board control and feel. The Micro-Dot also absorbs less water to keep your board feeling light and lively, while being less likely to rash your knees in tropical climate. Prolite uses a super light EVA foam that provides both maximum comfort and grip, along with new and improved German glue that will never let you down.
The Prolite Timmy Reyes I Traction Pad is a 3 piece pad with no arch and a medium kick.
Prolite Timmy Reyes I Traction Pad Dimensions:
Pad Length - 312mm
Pad Width - 325mm
Kick Height - 25mm
Prolite Timmy Reyes I Traction Pad Colors:
Grey/Seafoam Green
Black/Camo/Neon Orange
Black/Neon Blue
Become a Finatic™ and test fins from FCS & Future Fins!
And NOW Kinetik Racing Fins!
|
Ocean & Earth One Piece Leash
9ft. Premium Longboard (Multiple Colors)
Ocean & Earth 9ft. One Piece Premium Longboard Leash
Ocean & Earth is based in Australia and those Australians know how to make a leash! The 9ft. Ocean & Earth One Piece Premium Longboard Leash is 40% stronger, has 40% more stretch, and because its a one piece mold it has no joins and no weak points. This Leash has a plug buddy for easy attachment, original detachable railsaver, and a dual anchor-stainless-free spin swivel for tangle free surfing. The Ocean & Earth One Piece Premium Longboard leash line is built for Pro. riders, strong and durable for that extra peace of mind! Ocean Earth knows what their doing!
<a href="javascript:void(0);" onclick="popuptopicwh2 ('Page title','One Piece',1206,625,'yes')">Click Here to Learn more about the O&E One Piece Leash</a>
Ocean & Earth One Piece Premium Longboard Leash Size: 9ft
Ocean & Earth 9ft. One Piece Premium Longboard Leash Thickness: 9/32" (7mm)
Ocean & Earth 9ft. One Piece Premium Longboard Leash Colors: Black, Blue, and Lime
Become a Finatic™ and test fins from FCS & Future Fins!
And NOW Kinetik Racing Fins!
|
FCS II Fins Reactor
Thruster & Quad Rears
(All Materials/All Sizes)
FCS II Reactor Fins
**The FCS II Reactor SERIES FINS CAN ALL BE ORDERED HERE!**
These fins are designed to be used exclusively with the FCS II Fin system, they will not fit into the traditional FCS Dual Plug System.
FCS II Reactor Fins
The FCS II Reactor Fin is designed for surfers who like to stay in the pocket and perform aerial maneuvers. This fin uses the new FCS II technology which requires no screws. This easy system allows you to connect with the board and the water giving you the most premium surfing experience. The FCS II Reactor fin is best in hollow waves or punchy breaks to give you that extra maneuverability. This flat foiled fin has an upright template which allows for quick directional changes. If you have a high performance shortboard or a board with moderate to low rocker the FCS II Reactor fin is exactly what you need.
FCS II Reactor Fins Carbon:
High performance lightweight fin with Carbon strategically placed to give the fin the best flex pattern possible. Giving you the ultimate in speed and drive.
The FCS II Reactor Fins Carbon: Available in Small, Medium, and Large.
FCS II Reactor Fins Performance Core:
Performance Core material and construction is designed to deliver the feeling of a traditional fibreglass fin with added performance and reduced weight. The Resin Transfer Moulding process produces a lightweight fin with amazing flex and smooth feel.
The FCS II Reactor Fins Performance Core: Available in Medium.
FCS II Reactor Fins Neo Glass:
Neo glass construction consists of milled fiberglass that is nylon blended, which delivers pro performance through increased stiffness and high memory recall. Neo glass quickly accelerates and maintains momentum through transitioning turns.
The FCS II Reactor Fins Neo Glass: Available in Medium.
FCS II Reactor Fins Glass Flex:
Glass Flex has been formulated to replicate the flex and memory properties of hand layed fibreglass. This material will be more flexible than the other materials in this range. Some surfers may prefer the feel of glass flex in smaller surf. It also gives a more positive flex pattern and remarkable flex memory.
The FCS II Reactor Fins Glass Flex: Available in Medium.
FCS II Reactor Quad Rear Sizes:
FCS II Reactor Quad Rears Medium Sizes:
Center Base: 4.03 in. 102mm
Center Depth: 4.40 in. 112 mm
Surface Area: 12.63 in.²8150 mm²
Sweep: 28.5°
Foil: 80/20
FCS II Reactor Weight Recommendations:
Small: 121lbs/55kg -154lbs/70kg
Medium: 154lbs/70kg -176lbs/80kg
Large: 165lbs/75kg - 198lbs/90kg
No Reviews Yet! Finatic™ Member? Click here to test this fin!
Become a Finatic™ and test fins from FCS, Futures, Kinetik & More!
Finatic™ NOW has fin reviews!
|
FCS II Fins Carver
Thruster & Quad Rears
(All Materials/All Sizes)
FCS II Carver Fins
**The FCS II Carver SERIES FINS CAN ALL BE ORDERED HERE!**
These fins are designed to be used exclusively with the FCS II Fin system, they will not fit into the traditional FCS Dual Plug System.
FCS II Carver Fins
The FCS II Carver Fin is designed to be that go to fin for performing long arc turns. This fin uses the new FCS II technology which requires no screws. This easy system allows you to connect with the board and the water giving you the most premium surfing experience. The FCS II Carver fin is an elongated fin which allows you to push hard against your fins and draw out your turns. Ideal in open face, down the line waves, this fins works best in point and reef breaks. The FCS II Carver has a high degree of sweep angle which provides exceptional control off the bottom and for carving off the open face. This fin is best for boards with deep concave and moderate to extreme rocker.
FCS II Carver Fins Carbon:
High performance lightweight fin with Carbon strategically placed to give the fin the best flex pattern possible. Giving you the ultimate in speed and drive.
The FCS II Carver Fins Carbon: Available in Medium and Large
FCS II Carver Fins Performance Core:
Performance Core material and construction is designed to deliver the feeling of a traditional fibreglass fin with added performance and reduced weight. The Resin Transfer Moulding process produces a lightweight fin with amazing flex and smooth feel.
The FCS II Carver Fins Performance Core: Available in Medium and Large
FCS II Carver Fins Neo Glass:
Neo glass construction consists of milled fiberglass that is nylon blended, which delivers pro performance through increased stiffness and high memory recall. Neo glass quickly accelerates and maintains momentum through transitioning turns.
The FCS II Carver Neo Glass: Available in Medium and Large
FCS II Carver Fins Glass Flex:
FCS II Carver Fins Glass Flex:
Glass Flex has been formulated to replicate the flex and memory properties of hand layed fibreglass. This material will be more flexible than the other materials in this range. Some surfers may prefer the feel of glass flex in smaller surf. It also gives a more positive flex pattern and remarkable flex memory.
The FCS II Carver Fins Glass Flex: Available in Medium and Large
FCS II Carver Sizes:
FCS II Carver Medium Sizes:
Center Base: 4.47in. 113mm
Center Depth: 4.54in. 115mm
Surface Area: 14.96in.² 9650 mm²
Sweep: 37.0°
Foil: Flat
FCS II Carver Large Sizes:
Center Base: 4.58in. 116mm
Center Depth: 4.66in. 118mm
Surface Area: 15.73in.² 10150 mm²
Sweep: 37.0°
Foil: Flat
FCS II Carver Quad Rear Sizes:
FCS II Carver Quad Rears Medium Sizes:
Center Base: 4.14 in. 105mm
Center Depth: 4.21 in. 107mm
Surface Area: 12.63 in.²8150 mm²
Sweep: 33.2°
Foil: 50/50
FCS II Carver Weight Recommendations:
Medium: 154lbs/70kg -176lbs/80kg
Large: 165lbs/75kg - 198lbs/90kg
No Reviews Yet! Finatic™ Member? Click here to test this fin!
Become a Finatic™ and test fins from FCS, Futures, Kinetik & More!
Finatic™ NOW has fin reviews!
|