FCS II Carver Fins

These fins are designed to be used exclusively with the FCS II Fin system, they will not fit into the traditional FCS Dual Plug System.

FCS II Carver Fins

The FCS II Carver Fin is designed to be that go to fin for performing long arc turns. This fin uses the new FCS II technology which requires no screws. This easy system allows you to connect with the board and the water giving you the most premium surfing experience. The FCS II Carver fin is an elongated fin which allows you to push hard against your fins and draw out your turns. Ideal in open face, down the line waves, this fins works best in point and reef breaks. The FCS II Carver has a high degree of sweep angle which provides exceptional control off the bottom and for carving off the open face. This fin is best for boards with deep concave and moderate to extreme rocker.

FCS II Carver Fins Carbon:

High performance lightweight fin with Carbon strategically placed to give the fin the best flex pattern possible. Giving you the ultimate in speed and drive.

The FCS II Carver Fins Carbon: Available in Medium and Large

FCS II Carver Fins Performance Core:

Performance Core material and construction is designed to deliver the feeling of a traditional fiberglass fin with added performance and reduced weight. The Resin Transfer Molding process produces a lightweight fin with amazing flex and smooth feel.

The FCS II Carver Fins Performance Core: Available in Medium and Large

FCS II Carver Fins Neo Glass:

Neo glass construction consists of milled fiberglass that is nylon blended, which delivers pro performance through increased stiffness and high memory recall. Neo glass quickly accelerates and maintains momentum through transitioning turns.

The FCS II Carver Neo Glass: Available in Medium and Large

FCS II Carver Fins Glass Flex:

FCS II Carver Fins Glass Flex: Glass Flex has been formulated to replicate the flex and memory properties of hand layered fiberglass. This material will be more flexible than the other materials in this range. Some surfers may prefer the feel of glass flex in smaller surf. It also gives a more positive flex pattern and remarkable flex memory.

The FCS II Carver Fins Glass Flex: Available in Medium and Large

FCS II Carver Sizes:

FCS II Carver Medium Sizes:
Center Base: 4.47in. 113mm
Center Depth: 4.54in. 115mm
Surface Area: 14.96in.² 9650 mm²
Sweep: 37.0°
Foil: Flat

FCS II Carver Large Sizes:
Center Base: 4.58in. 116mm
Center Depth: 4.66in. 118mm
Surface Area: 15.73in.² 10150 mm²
Sweep: 37.0°
Foil: Flat

FCS II Carver Quad Rear Sizes:

FCS II Carver Quad Rears Medium Sizes:
Center Base: 4.14 in. 105mm
Center Depth: 4.21 in. 107mm
Surface Area: 12.63 in.²8150 mm²
Sweep: 33.2°
Foil: 50/50

FCS II Carver Weight Recommendations:

Medium: 154lbs/70kg -176lbs/80kg
Large: 165lbs/75kg - 198lbs/90kg


No Reviews Yet! Finaticâ„¢ Member? Click here to test this fin!