|
|
|
|
3D Moonrakerr 5.0 Medium Fins
*3D Fins ARE made either FCS or Future Fins compatible.
**Click here for the FCS Version.
Do you want extra drive and hold? If you do, then any fin in the 3D Moonrakerr Fin line is a must have for your quiver. The combination of the swept back rake along with 3D Fins patented dimple technology allows their fins to create incredible drive, quick release through turns and great hold in bottom turns. The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology. It has been designed to give extra speed and drive, both down the line and through critical turns. Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%. This gives a surfer the ability to gain more speed, and with more speed comes the opportunity for more advanced manoeuvres.
3D Fins Moonrakerr 5.0 Medium Fins:
You will find the 3D Moonrakerr 5.0 Medium Fins extremely fast in to and out of turns, super smooth through transitions and when you want to accelerate, these babies will respond - fast! Suitable for the vast majority of surfers and conditions. 145 lbs. - 175 lbs. (65 kg - 80 kg)
Optimum weight range: 55kg
3D Moonrakerr 5.0 Fin Size:
Base: 4.37 in. 110 mm
Height: : 4.55 in. 115 mm
Area: 14.76 in.² 9525 mm²
Sweep: 32.0°
Foil: IFT
3D Moonrakerr 5.0 Fins are available in: Thermo-Composite in Blue Metal, Elephant Girl, Skull Duggery, Platinum, and Leopard
7.0 Side fins
Height: 4.72" / 120mm
Base: 4.64" / 118mm
Area: 16.16 sq" / 10426mm²
Sweep: 36.6º
Foil: Flat
7.0 Center fins
Base: 4.64" / 117.9mm
Height: 4.49" / 114mm
Area: 15.32" / 9884mm²
Sweep: 36.6º
- See more at: http://www.3dfins.com/products/moonrakerr/moonrakerr-7-0-twin-tab/#sthash.IfpxMaNR.dpuf Moonrakerr Fin: Available in Blue Metal, Elephant Girl, Leopard, Skull Duggery, Platinum Sweep: 36.6º Area: 15.32" / 9884mm²
Click here to read reviews from Finatic™ Members
"The Fins Felt Great"
- Erwin M., Oceanside, CA on the 3D Fins Moonrakerr 5.0 Medium - Futures Compatible
Overall Fin Rating: 5.0
Height: 5'7"
Weight: 131 - 140 lbs.
Surfing Experience: (1 - 10): 7
Home Break:Trestles
Where did you surf these fins: Uppers and Lowers
Wave Height: 4 - 6 ft.
Wave Conditions: Good
Misc. Wave/Location Information: N/A
Type of Board: Shortboard
Board Size: 5 ft. 8 in.
Fin Setup: Quad
Misc. Board Information: 3D MoonraKERR 5.0 front/QD2 375 rears/Nub * CH Uppers, most vert off the lip ever, felt good pumping down the line, really good roundhouse cutbacks; got one of my best 2 x off the lip combos. * CH to HH Lowers, swooping carves felt great, bottom turns felt solid, felt like I got to 11:00 on HH off the lip * Feels easier to rotate through off-the-lips
Other Thoughts: I liked the fins so much, I ended up buying a set with the skull graphics. I don't know if the dimples helped any, but the fins felt great. Very similar template to Lost MB3 which also felt great. Decided on the 3D instead of MB3 fins because the 3D fins look better and also I prefer composite construction (3D) over honeycomb (MB3). I've had honeycomb construction fins delaminate in the past after scraping the fins on some rocks.
Become a Finatic™ and test fins from FCS, Futures, Kinetik & More!
Finatic™ NOW has fin reviews!
|
|
|