FCS M Series Green Flex Fins

**The FCS M3, M5 and M7 GREEN FLEX FINS CAN ALL BE ORDERED ON THIS PAGE!

FCS's innovative M Series Fins are advanced injection molded Fins. Similar to the FG-series, the FCS M3 Fins utilize the same templates as the FG3, while the FCS M5 Fins utilize the same templates as the FG5 and the FCS M7 Fins utilize the same templates as the FG7. These FCS fins are fast and smooth, with better hold and more squirt through turns. The M-series Fins have a flexible tip for forgiveness and control at high speed. The new Inside Foil Technology offers superior drive and hold. The FCS M3, M5 and M7 Fins all come in Green Flex which offers the flex pattern modeled off a hand-foiled fiberglass fin and the ability to mold highly technical computer generated foils accurately.

Green flex is a recycled material from FCS in an initiative to reduce impact on the Environment. Made from post consumer Material, namely used carpet, Green Flex matches the strength and flex properties of revolutionary Glass flex.

The FCS M3 Fins are fast and smooth with plenty of squirt through the turns.

Center Base: 4.28 in. 109 mm
Center Depth: 4.41 in. 112 mm
Surface Area: 14.22 in.² 9172 mm
Sweep: 31°

The FCS M5 Fins are fast and smooth with more hold and a good amount of squirt through the turns.

Center Base: 4.37 in. 111 mm
Center Depth: 4.55 in. 115 mm
Surface Area: 14.76 in.² 9525mm²
Sweep: 33°

The FCS M7 Fins are fast and smooth with plenty of hold through the turns.

Center Base: 4.52 in. 115 mm
Center Depth: 4.67 in. 119 mm
Surface Area: 15.71 in.² 10137 mm²
Sweep: 33°

The FCS M3, M5 and M7 Fins: available in Green Flex

FCS makes these fins with & without the infinity logo on them. If you'd prefer one over the other please make a note in the notes field for us.