Channel Islands Surfboards<br/> Neck Beard 2<br/> PU/PE | Spine-Tek EPS<br/> (All Sizes | FCS II | Futures)

Channel Islands Surfboards
Neck Beard 2
PU/PE | Spine-Tek EPS
(All Sizes | FCS II | Futures)

Channel Islands Surfboards<br/> Neck Beard 2 (PU/PE)
Channel Islands Surfboards
Neck Beard 2 (PU/PE)
10% Off All Accessories With Surfboard Purchase.
Use Coupon Code "Surfboard".

Show Picture 1
Show Picture 2
Show Picture 3

Channel Islands Neck Beard 2 Surfboard

*To order a completely custom Channel Islands Neck Beard 2, please contact us and we'll get you dialed. (813-436-0484)

What can we say about Channel Islands Surfboards? Yes, some have come to know them as "CI" Surfboards, but honestly when you've been around 50 years does it matter? No. What matters is Channel Islands Surfboards are a staple in the surf industry and for good reason, they span 3 generations and carry 20 world titles. Channel Islands Surfboards set the standard and now they've come home, to The Surfboard Warehouse.

Channel Islands Neck Beard 2 Surfboard
When it comes to the Channel Islands Neck Beard, when something isn’t broke, there’s no need to fix it. That said, Britt Merrick and Dane Reynolds still felt a few slight refinements would make an already epic board that much better and out popped the Channel Islands Neck Beard 2 and it did become more epic. Merits to the updates on the Channel Islands Neck Beard 2 can be seen in Dane’s new surf film “The Electric Acid Surfboard Test.”

A big fan of single concave, Dane asked Britt to take out the vee from the original Neck Beard, creating single throughout on the Neck Beard 2. This changed the rocker landscape some, but in a very positive way—enhancing its wave entry, down-the-line speed, and overall control. They also widened the tail block 1/2” and added a slight hip on the Channel Islands Neck beard 2, resulting in increased responsiveness and maneuverability.

Additional Information:
Dane prefers the Neck Beard 2 as a tri-fin, but those that like quads may notice added down-the-line speed. It comes with a five-fin setup to get the best of both worlds.  The Channel Islands Neck Beard 2 comes stock in both PU/PE and EPS Spine-Tek.

Spine-Tek EPS:
Channel Islands has announced a collaboration with Shapers Australia to launch a material called SPINE-TEK; a precision engineered stringer spine utilizing a unique composition of fiberglass and resin. SPINE-TEK is based on the principles of elastic energy, to flex under pressure and then return the surfboard back to its natural rocker, providing surfboards with a more lively and responsive feel.

Performance through innovation, SPINE-TEK® is a Channel Islands world’s first with its unique fiber-based composition, delivers optimal flex based performance through the principles of elastic & kinetic energy. Through this process the surfboard loads up on energy and then releases, generating additional drive, speed, power & flow.

Weighing a mere ¼ of a pound and installed in the surfboard deck, SPINE-TEK replaces the traditional heavier timber stringers and is virtually break free. Spine-Tek is now available in any custom EPS board and comes stock in select models.

Channel Islands Neck Beard 2 Surfboard - Stats at a Glance:

5’4" 18 5/8" 2 3/16" Square 24.2
18 7/8"
2 1/4"
5’6" 19" 2 5/16" Square
5’7" 19 1/8" 2 3/8" Square 28.1
5’8" 19 3/8" 2 7/16" Square 29.7
5’9" 19 5/8" 2 1/2" Square 31.3
5’10" 19 7/8" 2 9/16" Square 32.9
5’11" 20" 2 5/8" Square 34.4
6’0" 20 1/8" 2 11/16" Square 35.9
6’2" 20 3/8" 2 3/4" Square 38.2

Channels Islands Neck Beard 2 Surfboard - available in: PU/PE and Spine-Tek EPS.

Become a Finatic™ and test fins from FCS & Future Fins!
And NOW Kinetik Racing Fins!