Surf Shop Online
The easiest way to test surfboard fins.
Get your first month free with code “TSBW”
FCS II Fins RP <br/>RUSTY Surfboard Fins<br/>(Thruster | 5-Fin | Medium)

RUSTY Surfboard Fins
(Thruster | 5-Fin | Medium)

FCS II RP Fins - Rusty<br/>Performance Core (5-Fin Set)
FCS II RP Fins - Rusty
Performance Core (5-Fin Set)
FCS II RP Fins - RUSTY<br/>Performance Core (Tri-Fin Set)
Performance Core (Tri-Fin Set)
Show Picture 1
Show Picture 2

FCS II RP Fins - RUSTY (Thruster & 5-Fin)

The FCS II RP Shaper Series Fins are FINALLY here! After being fine tuned by Rusty Preisendorfer and the team at RUSTY, released as a Thruster and 5-Fin, the RP template is now a member of the FCS II Shaper Series range and are designed to be used exclusively with the FCS II Fin system. They will not fit into the traditional FCS Dual Plug System.

FCS II RP Performance Core Fins
The FCS II RP (Rusty) Fins were designed by Rusty Preisendorfer himself, available as a Thruster or 5-Fin, these fins are for those that like pushing hard on their fins. This is because the tip has a thicker foil than most other fins, is therefore it is quite stiff, and will feel very receptive to the rider. So, when you push against the FCS II RP Fins, the fins will react immediately with forward speed. The trailing edge of the FCS II RUSTY Fins has significantly more curve and the sweep is not too high, meaning tail release is still achievable for surfers with enough power. The inside foil (IFT) on Rusty’s fin creates bite so you’ll feel really connected to the wave face during a more committed, drawn-out turn. The FCS II RP Fins deliver a feeling of control and a positive connection to the wave that allows you to confidently drive hard off the bottom and lay into a big turn without fear of sliding out. The quad set also delivers a feeling of control but with a little more freedom off the tail. While still considered to be a performance shortboard orientated set, Rusty’s fin is perfectly suited to higher volume hybrid models.

FCS II RP Fin Material
Performance Core material and construction is designed to deliver the feeling of a traditional fiberglass fin with added performance and reduced weight. The Resin Transfer Molding process produces a lightweight fin with amazing flex and smooth feel.

The FCS II RP Fins Performance Core: available in Medium

FCS II RP Performance Core Front Fin Size: 145lbs/65kg -175lbs/80kg
Base: 4.56 in. 116 mm
Depth: 4.50 in. 114 mm
Area: N/A
Sweep: 33.9°
Foil: ITF

The FCS II RP Performance Core Fin: available in Green/White/Yellow Swirl

Finatic Fin Reviews
No Reviews Yet! Finatic™ Member? Click here to test this fin!

Become a Finatic™ and test fins from FCS, Futures, Kinetik & More!
Finatic™ NOW has fin reviews!
Combine Your Purchase With