FCS (PC2 PC3 PC5 PC7) PC Series Fins - The Surfboard Warehouse

Manufacturers

Products

You have 0 item(s) in your Shopping Cart Login

FCS PC Fins

**The FCS PC2 PC3, PC5 and PC7 CAN ALL BE ORDERED ON THIS PAGE!

The FCS PC2 is a BRAND NEW fin for groms that sits between the G-1000 and G-3000. The FCS PC3 Fins utilize the same templates and foils as the FG3, while the FCS PC5 Fins utilize the same templates and foils as the FG5 and the FCS PC7 Fins utilize the same templates and foils as the FG7. The inside Foils were developed by FCS to increase fin efficiency, speed and hold through more positive water flow. The PC Fins have a rounded leading edge that optimize foil performance by allowing water to flow efficiently over the foil, increasing the fins overall speed, drive and smooth rail to rail transition. The FCS PC fins have a progressive flex pattern that consists of a solid fin base combined with a slight, responsive tip flex.

PC Series Materials:

Resin transfer molding (RTM) allows the FCS Performance Core fins to be made stiffer with the additional benefit of reduced weight. This stiffer flex pattern allows you to push extremely hard through turns while the Inside Foil Technology provides increased drive. Another favorite with the pros, the FCS PC fins will suit the more powerful surfer or those wanting to push each turn to the limit. Each FCS PC fin produced is hand finished and polished giving the fin a glossy smooth feel. The FCS PC series fins also have a range of resin tints that make for an impressive aesthetic.

FCS PC2:

FCS PC2 Fin Size:

Center Base: 4.26 in. 108 mm
Center Depth: 4.22 in. 107 mm
Surface Area: 12.03 in.² 8405 mm²

Sweep: 32.3°

FCS PC3:

FCS PC3 Fin Size:

Center Base: 4.28 in. 109 mm
Center Depth: 4.41 in. 112 mm
Surface Area: 14.22 in.² 9172 mm²

Sweep: 31°

FCS PC5:

FCS PC5 Fin Size:

Center Base: 4.37 in. 111 mm
Center Depth: 4.5 in. 115 mm
Surface Area: 14.75 in.² 9491 mm²

Sweep: 33